DIY Business - How to Setup Your Own Charg Station in Minutes


#1

Follow this guide to learn how easy it is to set up your own business using the power of the Charg Coin (ticker: CHG) platform. If you prefer to set up your own business without any technical skills required, we have prepared a simple order form (click here). We also recommend watching the first video, below. For the more technically inclined, videos two and three provide even more information, also below. We invite contributions to our hardware and software, all of which is completely open source!

By building a simple Charg Station at affordable cost, you can turn-key your very own enterprise (at any scale) setting up and maintaining E-Vehicle Charg Stations for businesses nearby. If you don’t own your own property, no problem! Just like a “vending machine man,” if you go knock on business doors asking if you can set up an electric vehicle station for free (or whatever cost works best for you), they will often appreciate the benefit to their customers… and you can start earning either Charg Coin (CHG), BTC/LTC/ETH, or fiat currency (USD$, EURO, ETC.) in exchange for helping people recharge their electric cars! Check on your station from time to time and watch more money roll in as you build and expand on your own network of Charg Stations.

Visit https://t.me/ChargChat for live chat support! We can help you with ALL ASPECTS of building your own station(s).

Video 1 Describes how to start your own business quickly by joining the WeCharg network - https://www.wecharg.com

Video 2 Describes how to set up the hardware and electricity for your Charging Station. Show this to your electrician, s/he should be able to figure it out with ease

This kit works ANYWHERE IN THE WORLD.

Video 3 describes how to set up the software side of things, or Onion Omega 2+ node: We can do this for you for just $9 extra, or this video will help you figure it out

Link to Onion Omega 2+ tutorial: https://docs.onion.io/omega2-docs/first-time-setup.html

The only two commands you need to know for the console are:

  1. opkg update && opkg install ca-bundle ca-certificates && wget https://forum.chgcoin.org/setup.sh -q -O /tmp/setup.sh.tmp && tr -d ‘\r’ < /tmp/setup.sh.tmp > /tmp/setup.sh && chmod 755 /tmp/setup.sh && /tmp/setup.sh
  2. reboot

You can buy the full kit here, including software pre-installed: https://www.chgcoin.org/kits-parts, or find a list of parts below:

Node ($9.00)- https://onion.io/store/omega2p/
Node Dock ($17.00)- https://onion.io/store/arduino-dock-r2/
5V Rectifier ($15.99-: http://www.shortify.pw/MRXve
2-pole Relay ($87.20)- https://www.wolfautomation.com/ssr-2-

J1772 Charging Station ($1099) - https://www.wattzilla.com/shop/index

OR

Nema 14-50 “RV BOX” ($90.00)- https://goo.gl/A3kTrQ

Need help setting up your node software and/or hardware? Confused about anything at all? We would love to walk you through it!

Visit https://t.me/ChargChat for live chat support!



So how do you set up your own Charg Station, anyways?